Installation Guide

1. Carbon Fiber Steering Wheel Installation 

Tools Needed:

• Screwdrivers
• Wire cutters and strippers
• Multimeter (for testing wires)
• Electrical tape or heat shrink tubing
• Optional: Add-A-Fuse kit

Steps:

1. Safety First:
   • Turn Off the Car & Disconnect the Battery: Prevents electrical hazards.
2. Remove the Old Steering Wheel:
   • Access: Unscrew bolts or screws behind the wheel.
   • Detach: Unhook the airbag and any connected wires.
   • Remove: Use a steering wheel puller if necessary.
3. Install Your New RealCarbonClutch Steering Wheel:
   • Align: Position it with the steering column.
   • Connect: Hook up LED wires and other controls.
   • Secure: Fasten the wheel firmly with the central bolt.
4. Wiring for LED Lights:
   • Power Source: Use a multimeter to find a suitable connection.
   • Connect: Attach LED wires to power and a ground point.
   • Add-A-Fuse: Optional for clean installation.
5. Testing:
   • Reconnect Battery: Restore power.
   • Function Check: Ensure the steering wheel and LEDs are operational.
   • Secure Wires: No loose connections.

2. Carbon Fiber Airbag Cover Installation 

Steps:

1. Access the Airbag Module:
   • Remove Retention Mechanisms: Find and remove screws or clips.
   • Extract Module: Carefully pull out the airbag.
   • Disconnect: Unhook electrical connectors.
2. Install New realCarbonClutch Airbag Cover:
   • Remove Old Cover: Detach and set aside.
   • Fit New Cover: Snap or screw it into place securely.
3. Reassemble Airbag:
   • Reconnect Wires: Plug back in.
   • Secure Airbag: Place it back in the steering wheel.
4. System Check:
   • Reconnect Battery: Reattach the negative terminal.
   • Test: Start the car and check for correct airbag light behavior.

3. Carbon Fiber Paddle Shifters Installation 

Steps:

1. Prepare:
   • Ensure Stability: Park in a safe location.
   • Battery Off: Disconnect to avoid electrical issues.
2. Remove Existing Shifters:
   • Uncover: Use a trim tool to remove any panels.
   • Detach: Unscrew or unclip old paddles.
3. Install RealCarbonClutch Paddles:
   • Align: Place in the same location as old ones.
   • Secure: Fasten with provided screws or clips.
4. Finalize Installation:
   • Reassemble Panels: Replace any panels removed.
   • Reconnect Battery: Restore power.
   • Test: Check paddle response by starting the car.

Final Checks:

• Double-check all installations: Ensure everything is secure.
• Test all functions: Confirm proper operation before regular use.

This comprehensive guide ensures a smooth and safe upgrade with premium RealCarbonClutch products, enhancing both the aesthetics and functionality of your vehicle’s interior.