1. Carbon Fiber Steering Wheel Installation 

Tools Needed:

  • Screwdrivers
  • Wire cutters and strippers
  • Multimeter (for testing wires)
  • Electrical tape or heat shrink tubing
  • Optional: Add-A-Fuse kit

Steps:

  1. Safety First:
    • Turn Off the Car & Disconnect the Battery: Prevents electrical hazards.
  2. Remove the Old Steering Wheel:
    • Access: Unscrew bolts or screws behind the wheel.
    • Detach: Unhook the airbag and any connected wires.
    • Remove: Use a steering wheel puller if necessary.
  3. Install Your New RealCarbonClutch Steering Wheel:
    • Align: Position it with the steering column.
    • Connect: Hook up LED wires and other controls.
    • Secure: Fasten the wheel firmly with the central bolt.
  4. Wiring for LED Lights:
    • Power Source: Use a multimeter to find a suitable connection.
    • Connect: Attach LED wires to power and a ground point.
    • Add-A-Fuse: Optional for clean installation.
  5. Testing:
    • Reconnect Battery: Restore power.
    • Function Check: Ensure the steering wheel and LEDs are operational.
    • Secure Wires: No loose connections.

2. Carbon Fiber Airbag Cover Installation 

Steps:

  1. Access the Airbag Module:
    • Remove Retention Mechanisms: Find and remove screws or clips.
    • Extract Module: Carefully pull out the airbag.
    • Disconnect: Unhook electrical connectors.
  2. Install New realCarbonClutch Airbag Cover:
    • Remove Old Cover: Detach and set aside.
    • Fit New Cover: Snap or screw it into place securely.
  3. Reassemble Airbag:
    • Reconnect Wires: Plug back in.
    • Secure Airbag: Place it back in the steering wheel.
  4. System Check:
    • Reconnect Battery: Reattach the negative terminal.
    • Test: Start the car and check for correct airbag light behavior.

3. Carbon Fiber Paddle Shifters Installation 

Steps:

  1. Prepare:
    • Ensure Stability: Park in a safe location.
    • Battery Off: Disconnect to avoid electrical issues.
  2. Remove Existing Shifters:
    • Uncover: Use a trim tool to remove any panels.
    • Detach: Unscrew or unclip old paddles.
  3. Install RealCarbonClutch Paddles:
    • Align: Place in the same location as old ones.
    • Secure: Fasten with provided screws or clips.
  4. Finalize Installation:
    • Reassemble Panels: Replace any panels removed.
    • Reconnect Battery: Restore power.
    • Test: Check paddle response by starting the car.

Final Checks:

  • Double-check all installations: Ensure everything is secure.
  • Test all functions: Confirm proper operation before regular use.

This comprehensive guide ensures a smooth and safe upgrade with premium RealCarbonClutch products, enhancing both the aesthetics and functionality of your vehicle’s interior.